HELLA LED-Worklight - Power Beam 1500 - 12/24V 1GA996288-001

LED-Worklight - Power Beam 1500 - 12/24V - 1300lm - mounting/Bolted - Vertical/Swivelling Mounting Bracket - Long-range illumination - Plug: DEUTSCH plug

The Power Beam 1500 is an ideal LED worklight that combines powerful light output in a practical design. The worklight is designed to be universally applicable due to its compact dimensions. The light of the 6 high-power LEDs is homogeneously distributed in the working area by a specially developed multi-facet reflector. Thanks to its powerful light output, the Power Beam 1500 can replace standard halogen worklights (e.g. H3 / 55 watts) - with a power consumption of only 22 watts. This makes the worklight ideal for use on vehicles with battery operation and also, where the alternator is already heavily loaded. The spotlight can be operated with either 12 or 24 volts. The integrated electronics are protected against reverse polarity and equipped with an LED fault bypass. This ensures the function of the worklight even in the unlikely event of an LED failure. With a colour temperature of 5,700 Kelvin, the light of the LED worklight is similar to daylight. This has the effect of distinguishing colours more clearly in the dark, making sensory perception much easier for the human eye. Working at night is thus made easier and rapid eye fatigue is prevented. The black housing of this worklight is made of aluminium and has cooling fins. These ensure the necessary heat dissipation of the 6 high-performance LEDs. In addition, a temperature sensor protects the worklight from overheating. Only in this way can the long service life of the LEDs be fully exploited. The plastic part at the back acts as a handle to tilt the worklight into the right position.

• The light of the 6 high-power LEDs is homogeneously distributed in the working area by a specially developed multi-facetted reflector.
• Thanks to its powerful light output, the Power Beam 1500 can replace standard halogen worklights.
• Thanks to its low power consumption, the worklight is ideal for use on battery-powered vehicles and on vehicles whose alternator is already heavily loaded.
• The black housing of this worklight is made of aluminium and is equipped with cooling fins. These ensure the necessary heat dissipation of the 6 high-power LEDs.
• The plastic part on the back acts as a handle to tilt the worklight into the correct position.
• Lamp Type: LED - Number of LEDs: 6 - Power consumption: 22W - Colour Temperature: 5700K
• Clear diffusing lens

Item Attributes:
Mounting Type: mounting / Bolted
Fastening Type: Vertical / Swivelling Mounting Bracket
Light Design: LED
Lamp Type: LED
Voltage: 12 V / 24 V
Height: 129 mm
Width: 112 mm
Depth: 62 mm
Light Distribution: Long-range illumination
Registration Type: ADR/GGVS
fulfils ECE standard: R10
fulfils test standard: RCM
Plug: DEUTSCH plug
Prot.type (IP Code): IP6K9K / IP6K7
Luminous Flux: 1300 lm
Colour Temperature: 5700 K
Number of LEDs: 6
Power consumption: 22 W
Housing Type: Aluminium Housing
Housing Colour: black/grey
Diffusing Lens Material: Polyamid 12
Diffusing Lens Type: Clear diffusing lens
Reverse polarity protection: Yes
SVHC: 7439-92-1; Lead
Assembly by qualified personnel required!

OE references: CLAAS 048 899 91; ROSENBAUER 869148; SANY 60229119.; SCANIA 20223053; TEREX T144828; TEREX T144858; VOLVO 15670554